Uncategorized
Archdale Metallic
Problem: Client wanted a seamless metallic floor for his basement bathroom. Solution: Clean and grind the floor per SSPC SP-13, apply ⅛” urethane cement, apply one coat of 100% solids epoxy primer, apply one coat of self leveling 100% solids clear epoxy with metallic pigments added and create the desired effect.
Read MoreGreensboro Acid Stain
Problem: Client wanted a rustic, mottled look on the floor in her workout room. Solution: Clean and grind the floor per SSPC SP-13, stain the concrete floor utilizing an acid stain, let stain sit overnight then neutralize and clean the acid residue, apply 2 coats of clear moisture cured urethane.
Read MoreStamped Concrete
Problem: Client had old stamped concrete with worn off sealer and the client was tired of sealing the concrete every couple of years. Solution: Pressure wash the sidewalk and let dry, apply 2 coats of clear moisture cured urethane for a longer life cycle than typical clear sealers.
Read MoreLexington Metallic Basement
Problem: Client wanted a seamless metallic floor for his basement. Solution: Clean and grind the floor per SSPC SP-13, fill cracks and control joint with an epoxy mortar and grind smooth, apply two coats of 100% solids epoxy primer, apply one coat of self leveling 100% solids clear epoxy with metallic pigments added and create the desired effect.
Read More